Impact Mill Machine for Resin Particles

Impact Mill Machine for Resin Particles is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Impact Mill Machine for Resin Particles It is precisely pulverized for super fine powder below the micron-level, especially the high-end powder material, and can provide a high performance pulverization effect that other forms of crushing equipment, which can obtain narrower, peak Higher more than three different particle size ranges, greatly increase the added value of powder raw materials; there is a wide range of applications in metal and non-metallic fields.

ALPA Desinter Impact Mill Machine For Resin Particles Case Sharing: The company is a high-tech company that requires a desulfurizer crushing machine, investigating a number of powder equipment manufacturers at home and abroad, and finally chose our alpa Impact Mill Machine for Resin Particles.
Technical parameters:
finished particle size: 200 mesh 90% passed
production capacity: 4-5T

Let's take a look at the maintenance tips for eddy current pulverizer transmission chains!

Crusher Transmission Chain Protector should be intact, preventing personal injury accidents in the work in the work. Motor base fastening bolts are regularly checked, and the foundation must have sufficient steel to prevent the chain from joking or falling down due to basis, causing transmission failure. Check, repair, and maintenance of the machine, the power supply must be cut off and the sign is applied. It is strictly forbidden to extend the hand or other tools into the machine during the machine operation. Only after the machine is completely stopped, you can clean up and check the machine.
The cable in the pulverizer should have a protective casing.
During the operation, at least each class checks if the compressed air line is leaking, and the water water separation is discharged once. Check if the unloading door is leaking weekly, whether the sealing strip is damaged, whether the discharge link mechanism is in a dead position when closing. Clean the residual material attached to the inner wall of the bucket once a week. Wash the chain, sprocket, and refresh the chain sprocket with diesel brushing. Clean the injector per month while cleaning the inner wall of the mixer and the residual attachment material on the cover. Monthly measurement of a mixed machine exit and finished package, the determination of the variation coefficient should select the shortest mixed product.
In addition, users also need to check whether the wire connection in the motor junction box is loose. Clean up the remaining machine attached to the inner wall of the mixer and buffer. Clean up the oil and water separation triple piece to ensure that the air path is smooth.
SHAN DONG Alpa mainly engaged in the production and development and service of Impact Mill Machine for Resin Particles product technology, welcome to consult.With good quality and service, affordable prices, customer-oriented attitudes provide airflow crushing products and services.