2021-12-22 10:03:35
We all know that PIN Grinder of Astragalus is a very strong airflow crushing equipment. Many stubborn and hard materials will be cut into a uniform block,
Pin Grinder of The components of Astragalus include drive motors, pulverized wheels, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.
ALPA Soybean Pin Grinder Of Astragalus Case Sharing: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's PIN GRINDER OF ASTRAGALUS.PIN GRINDER OF ASTRAGALUS's daily maintenance
1, during production, the temperature rise of the bearing must be checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault.
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.
