Ring Roller Grinder for Rubber Additives

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, continuously improve your technical level, and constantly improve your own products, in order to make the airflow classifier industry have a broader development space.

Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Ring Roller Grinder for Rubber Additives generates a Juromon cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting points and thermal materials. Ring Roller Grinder for Rubber Additives The gas ratio in the pulverization process is an important technical parameter and important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.

When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
ALPA Steel slag Ring Roller Grinder for Rubber Additives Sharing: This customer is Xi'an Steel Slazing Application Technology Co., Ltd., mainly engaged in the reuse of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA vertical air classifier.

Product particle size: D97: 5-75μm
Hour Yield: 200-500kg

Super r Roller Grinder for Rubber Additives is the use of air separation, heavy polishing, cutting Sliced \u200b\u200bforms to achieve ultra-smash of dry materials, extensive applications in various industries. Let's take a brief introduction to its daily maintenance content.

2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top of the chassis plane of the active device, it is necessary to remove dust and other debris to avoid the material that cannot be broken.When the phenomenon that the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached.Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.


If you have something about other crushers, you want to know, welcome to consult!