2021-12-22 10:03:06
Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of Ring Roller Mills of Dental Ceramics technology in China is the stable development of Ring Roller Mills of Dental Ceramics technology, strong control, high quality.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the powerful centrifugal force of Ring Roller Mills of Dental Ceramics, the thickness of the material is separated from separation, the fine particle size of the pulverized wheel into the cyclone separator and dust removal, continues to be pulverized.
The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.
AlPa Cassava Starch Ring Roller Mills of Dental Ceramics Case Sharing: This customer is a new type of panel company, dedicated to providing professional and excellent plywood new fillers for plywood industry customers. The company needs to be used in the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.
Technical parameters:
Finished particle size: 98% over 325 mesh
Production capacity: 2T
Ring Roller Mills of Dental Ceramics produces certain noise, generate The main reason for noise is:
(1) When the coal mill is running at high speed, the operating component drives air to generate a \"whistle\" call:
(2) When the device is running. Generate vibration sound; (3), the friction between the turntable or the hammer and the drug; the rotating part itself is friction.
For the cause of noise, the main solution is as follows:
(1) adding oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing;
( 2) The heat generated during the breaking process also produces noise, and cools the cooling of the crushing chamber, the muffler is mounted in the air intake port of the pulverizer; (3) damping the damping pad and other devices.
The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.
