Turbo Crusher for Boron Nitride

In the rapidly developing areas, many people have a certain understanding of Turbo Crusher For Boron Nitride, and crusher technology is in an absolute leader in the industry.

For Turbo Crusher For Boron Nitride's service life, it is always necessary to keep in mind using common sense.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Turbo Crusher for Boron Nitride is cleaned in time. Keep Turbo Crusher for Boron Nitride's internal cleaning to avoid oxidation of the material and the inner contact of the lumen.


ALPA Buckwheat Powder Turbo Crusher for Boron Nitride Case Sharing:
A food company is a large joint venture specializing in the production and sales of beverage food.
From the development of a single variety to the production of various products, the products produced are all over the country.

Case parameters:
Product particle size: D50: 3-45μm
Hours Yield: 1-5kg

For Turbo Crusher for Boron Nitride blocking troubleshooting, Xiaobian talking about your own See you, I hope there is some reference role. Crushes blockage is the most common fault of machinery.
It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. During aquaculture, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This should be reduced or closed immediately, but it can also be controlled by increasing the feed speed to control the feed speed. Because the speed is fast, the load is large, Load fluctuations.Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.

(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked.It is necessary to regularly update the working status of the hammer aging and the serious aging, and check the screen regularly.Improve the production efficiency of universal grinding machines, improve the reliability of non-blocking and grinding.

Shan dong alpa is committed to Turbo Crusher for Boron Nitride, has a mature process process, has a high-energy technology R&D team, specializing in the development of crusher, survive by quality, welcome everyone to consult.