2021-10-11 17:04:04
Multiple Classify Wheel Classifier With Slag is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Multiple Classify Wheel Classifier with slag It is an industrial equipment that consists of a ball mill, a vibrating mill, and a power is 0.75 kW. With the development of society and the needs of people's lives, the industrial community is getting bigger and bigger, and the requirements for fineness, purity and pass rate are getting higher and higher, and the processing rate is high. Micro-powder equipment is usually extremely expensive and low productivity.
How to continue MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH SLAG life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.
The company has consistently follows the management of the standard, puts the quality of the first production and service policy, providing customers who are safe with confidently airflow crusher products and services.
