2021-10-11 17:04:02
What is the grading principle and process of FL Multiple-stage Classifier in Series With MonoSodium Glutamate? Below, you will share with you. 1. Open the switch in the control cabinet, start the power supply, the device operation; Physical role such as airflow and gravity is graded in three parts; 5, the airflow of three flow paths has a control valve group adjustment to maintain their respective balance; 6, the grading thick Chinese products are recovered separately; 7, clean air There is a blower to discharge into the atmosphere.
How to continue FL Multiple-stage Classifier In Series With MonoSodium Glutamate life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.
