Impact grinder of Bamboo Powder

Impact Grinder of Bamboo Powder is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Impact Grinder of Bamboo Powder Features:

With the high-pressure airflow, the material is pulverized, ensuring the purity of the material, facing the individual hardness of the material can use high hardness ceramic corundum as a pulverized cavity, greatly reduce the wear of the material to the pulverizer, to ensure material The purity is low-temperature and pulverized, and an inert gas can be used, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mineral powder.

High capacity, efficiency; compared with other ultrafine pulverizations of the same capacity, because of the continuous feed of Impact Grinder of Bamboo Powder, continuously pulverized, continuous recovery, the characteristics of continuously improvement, With the mode of automation control, the advanced level is much higher than other devices.

The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.

The product is fine, the particle size distribution is uniform, and the grading effect of Impact Grinder of Bamboo Powder makes it produced by ultrafine powder fineness and distribution, and then in conjunction with Impact Grinder of Bamboo Powder. Use more to make the product particle size and distribution far better than the processing of other equipment.

ALPA seaweed feed Impact Grinder of Bamboo Powder case share: The company is a seafood enterprise in Yantai. It is found to be smashing seaweed during breeding process. It can be used as a sea cucumber after pulverization. Application, saving the cost of feed purchase. By comparing the long-term use of Impact Grinder of Bamboo Powder, it is possible to save the price of the production line for several years. The company purchased our AlPa Impact Grinder of Bamboo Powder.
Technical parameters:
finished particle size: D90: 400 mesh
Production capacity: 400kg / h

Do you know how to use Impact Grinder of Bamboo Powder correctly? I hope the content below can help you.
1. Preparation before the pulverizer starts check the host, joint, pipeline, and valveNormal, normal work.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Shandong Alpa supplies a variety of IMPACT GRINDER OF BAMBOO POWDERs. If you need to buy Impact Grinder of Bamboo Powder, please feel free to contact us.