2021-12-16 14:22:58
Ring Roller Grinder of Silica Flour is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, and the particles are delicate, affordable.
RING ROLLER GRINDER OF SILICA FLOUR is precisely pulverized with ultrafine powder, especially high-end powder materials below, and provides high performance crushing effects that other forms of crushing equipment. After the pulverization treatment, the particle size range is narrower, more than three different granular ranges of different particle size ranges, greatly improve the added value of powder raw materials; there is a wide range of applications in the metals and non-metallic fields.ALPA Chemical Material Powder Ring Roller Grinder of Silica Flour Case Sharing:
A mechanical company is a company engaged in the development and manufacturing of a single set of soldering wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment. High-tech enterprise.
With complete, scientific quality management system and powerful R&D team, and continuously improve product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: Remove 20μm with fine powder
hour production: sorting efficiency 60-90%
1 Before using it, check all standard parts of the device to tighten, and the belt is tight.
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.
