Hammer crusher for chrome oxide red

With the continuous increase in social needs, Hammer Crusher for Chrome Oxide Red is constantly improving in terms of performance, finished product quality, service life, etc., very well, and is well processed into microtes and even nanoscale fine powder, but also Wide applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons have been widely used.

Hammer Crusher For Chrome Oxide RED is precisely pulverized with ultrafine powder below the micron-level, which can provide high performance crushing effects that other forms of crushing equipment. After the pulverization treatment, the particle size range is narrower, more than three different granular ranges of different particle size ranges, greatly improve the added value of powder raw materials; there is a wide range of applications in the metals and non-metallic fields.

ALPA CHROTIDE HAMMER CRUSHER for Chrome Oxide Red Case Sharing: The company is a professional manufacturer of active biological extracts. It is necessary to meet the ultrafine pulverizer to meet the requirements of GMP, and investigate a number of powder equipment manufacturers, and finally Purchased our Alpa's Hammer Crusher for Chrome Oxide Red.

Technical parameters:
Finished granularity: 100 full pass
Production capacity: 120kg

Ultra-micro Hammer Crusher for chrome oxide red correct usage:

1, super The microfiner and power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If there is a phenomenon such as vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately,Exclude the failure can continue.

Welcome everyone to choose our Shandong AlPa, company specializing in the production and development and service of airflow pulverizer product technology, the company provides customers with safe and reliable product and service, resolutionThe worries of the majority of customers.