Rotor Mills for Mercury Sulfide

In this economically booming area, many people know that Rotor Mills for Mercury Sulfide, crusher technology is in a leading position in the same industry.

Rotor Mills for Mercury Sulfide should be installed in place in a place to use.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

A energy company is a specialized in new energy vehicles for lithium-ion power batteries in new energy vehicles. High-tech enterprises, the company actively responded to the national policy call, in order to promote the rapid, sustainable development of new energy vehicles, sustainable development, adhere to the road to independent research and development, have a core technical system with complete independent intellectual property, successfully developed multiple The series of lithium-ion power battery batteries have been widely used in China's electric new energy vehicles, and market distribution has spread all over the country.
Case parameters: D50: 15μm
Hour Yield: 600kg

Rotor Mills for Mercury Sulfide Motor Maintenance Measures

3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.


For more consultation, please continue to pay attention to us, or inquire.