Vibration Grinder of Wheat Husk

Since the 1980s, with the development of the national economy, more and more industrial materials needed for dry ultrafine grinding, Vibration grinder of Wheat husk is the most effective device to achieve ultra-fine grinding powder one. In China, after 20 years of development, Vibration grinder of Wheat husk industry has been widely used in pesticides, food, pharmaceuticals, fine chemicals, electronics and other battery materials.

Vibration grinder of Wheat husk pulverized article is used, the crushed tailings and other items also timely discharged, when the mill is discharged after these items will be pulverized dust phenomenon.
How do I solve if the dust is too big?

1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;

2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.



alpa wheat Vibration grinder after baking of Wheat husk Case Study: The client company is a seasoning, in its production process may need to use a wheat after baking for ultrafine grinding equipment. An inspection tour of a number of domestic enterprises, the final choice as we alpa partners, from our side purchased Vibration grinder of Wheat husk.

The product size: D99.9: 180 mesh
capacity: 400KG

in the production process, the bearing temperature should always check, when the temperature exceeds 50 ℃ , they should stop to check, is to identify the reasons and troubleshooting. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. Host flow classification and bearings are greased, using special grease No. 2, of the bearing is filled about three months, the amount of grease filled bearing chamber space1/2 Sliced can not fill the grease will not cause too high of the bearing temperature.The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease.In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part.It is strictly forbidden to turn the handle on the stop.The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines.After four or five months, new oil should be replaced.

I hope everyone can buy the favorite of the airflow for the airflow!