PIN MILL OF PPS

PIN MILL OF PPS is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, and the particles are delicate, affordable.

PIN MILL OF PPS temperature will rise during operation, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

Technical parameters:
Finished granularity: 1250 mesh
Production capacity: 1.2-1.5T

Next:
1, install the dust collector: Generally now this dust collector can be matched with powder classifier Used, it is discharged by the dust income to catch the bag, and the dust is filtered by the dust box;
2, the bag is dustproof: the bag is tightly pulled with the machine to prevent leakage powder. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.
ALPA is a research and development of research and sales of ultra-fine classifiers, precision grading machines, laboratory grade machines, and is committed to classifying machines. Welcome friends in need to negotiate.