Ring Roller Grinder for Garlic PEEL

With the continuous improvement of pulverizer technology, Ring Roller Grinder for Garlic Peel is already familiar with people. Now the most popular crushing equipment is Ring Roller Grinder for Garlic PEEL. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Ring Roller Grinder for Garlic PEEL is a high-speed airflow to form a high-speed air flow using multiple relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the pulverizing chamber with the rising air flow, since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the gas flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.

Low temperature without media, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet flow can increase the pulverization efficiency of 30% compared to conventional gas flow grinding machines, and the precision is higher.

ALPA equipment is small, and the structure of the pulverizer can be highly machined so fine powder, avoiding the wear of the horizontal crusher pulverized part, and the equipment of the equipment is used under the same material. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.

AlPa Heavy Crystalline Ring Roller Grinder for Garlic Peel Case Sharing: This customer is a large-scale comprehensive group enterprise specializing in the mining, powder processing and sales of heavy crystal mines, which is from abroad. Imported crystallite crushing equipment. Later, by understanding, knowing the ultrafine pulverization equipment of our ALPA Co., Ltd., in terms of performance, in terms of foreign devices, far exceeding the same type of equipment, far exceeded the same type of equipment. Finally, after many exam, I purchased Ring Roller Grinder for Garlic Peel from our company.

Technical parameters:
Finished granularity: 1250 measures
Production capacity: 1.2-1.5T

Ring Roller Grinder for Garlic PEEL Motor Maintenance Measures

1, check the lubrication of the bearing Whether it is good
2, check if all fasteners of the pulverizer are fastened.
3, check whether the transmission belt is properly installed and good, if the belt breakage should be replaced in time, when there is oil in the belt or the grooveApply clean rag to wipe it in time.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.

The Ring Roller Grinder for Garlic Peel produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly with the mechanical crushing equipment, forming a closed circuit.Improve the crushing efficiency, and can avoid high temperatures in the cavity to cause adhesion, glue, causing the operation that cannot be carried out, and the grading machine has also received the majority of users, and the friends who need it will contact us!