2021-11-12 09:35:32
With the demand for social development and life, the demand for PIN Grinder for Lemon Pomace is increasing, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.
A PIN Grinder for Lemon Pomace is very high, if you want to use PIN Grinder for Lemon Pomace for a long time, please pay attention to the following:
In the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.pin Grinder for Lemon Pomace's host and level distribution bearings are lubricated with 2 special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a seventeen introduction to the daily maintenance of PIN Grinder for Lemon Pomace.
ALPA Chemical Raw Powder PIN Grinder for Lemon Pomace Case Sharing:
A mechanical company is a complete set of soldering wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment R&D, manufactured high-tech enterprises.
With complete, scientific quality management system and powerful R&D team, and continuously improve product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: Remove 20μm with fine powder
PIN Grinder for Lemon PomArt's daily maintenance is a very important part Here, PIN GrinderMaintenance method for for Lemon Pomace.
1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.
2. Check if the screws and nuts of each component are tightened.Check if the belt is smashed, whether it is tight.
3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct.If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.
To learn more about PIN GRINDER For Lemon PomAce, you will go to Shan Dong Alpa, the company is in research and development and production of crusher and crusher related products, quality multiplication, deeply welcomed by consumers, trustworthy.
