Hammer Crusher for Silicon Alloy Powder

Hammer Crusher For Silicon Alloy Powder is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Hammer Crusher for Silicon Alloy Powder In full-closed state, the fineness of the pulverized particles is better, the granular shape is good, the yield is also large, the pulverization process is no dust production, and the material purity is high after crushing, which greatly saves raw materials. Hammer Crusher for Silicon Alloy Powder can reach the effect of cell breakage during pulverization, so that the effective component dissolution of the medicinal material is greatly improved, and the efficacy is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

A technology company is a metal material as the main business, serving emerging industries, in powder materials and products, magnetic materials and products, welding materials and products , Filter materials and other fields. We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for advanced metal materials, product programs, and other functional applications to create value for customers. Products have been sold to several countries and regions, and are recognized by many well-known companies and customers at home and abroad.
Case parameters:
Horses Yield: 300kg

1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.
2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time to ensure quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower)Test) Cannot fill too much oil, otherwise the temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

Shandong AlPa is a source manufacturer specializing in Hammer Crusher For Silicon Alloy Power, all the year round to provide equipment for domestic and foreign customers, welcome to inquire!