Impact Mills of Nepheline-Syenite

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

Impact Mills of Nepheline-Syenite, a small amount of wear-resistant components made of special hard wear raw materials, small size, light weight, convenient replacement replacement. Impact Mills of Nepheline-Syenite The compressed air is dried by filtration, and the material is repeated, rubbed, and shear. The damaged material moves with the rising airflow to the cascading area under the exhaust. The low temperature failure is composed of silo, mechanical failure, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc. After the damage material is cooled and embritful, it is easy to destroy at low temperatures, and the destruction effect is achieved by repeated impact, collision, shear, and conflict between materials and materials. Impact Mills of Nepheline-Syenite has a high-speed blower of 20m / s, which affects other high-speed motion. Due to the large gas flow, the material impact strength is high, the grinding efficiency is high, the motion of the spray gun and the large axial movement of the cyclone data are minimized, and the impulse and metal wall wear are reduced. Since the air under the crushing chamber grinds the bottom of the conical bottom, the bottom portion enters the nozzle in the crushing chamber. The cone data can also be used for high-speed airflow nozzles, eliminating damage, blind spots, and data under spherical media and crushing rooms in time. The rolling of the cylindrical sphere, the irregular effects of the media, and the stratigraphic data, and the need for double-effect grinding, so that the grinding product is very thin and the particle size is uniform.

ALPA Potassium Sulfate Impact Mills of Nepheline-Syenite Case Sharing: This customer is a Saudi company, you need to grace the fine powder of potassium sulfate, investigate the international powder equipment company, and finally chose our alpa. Grading machine equipment.

Impact Mills of Nepheline-Syenite How to control the particle size size?

The smaller the particle size of the raw material, the higher the pulverization efficiency, the greater the particle size of the raw material, then the pulverization effect is relatively low. In the case of crushing pressure and feed pressure, reduce the feed speed product will be finer, and improve the feed speed product will become thick. In the case of a feed rate, the particle size of the pulverized pressure is improved, and the pulverization pressure is reduced, and the product will become thick.
So the particle size control is the adjustment of the parameters during the pulverizer to achieve different pulverized fineness, and it is necessary to measure the relationship between the feed velocity and pressure before crushing and then determine the appropriate pulverization parameters.

Welcome everyone to inquire!