Vibration Mills for ActiVated Carbon

Most of the product production and processing in the current stage uses Vibration Mills for Activated Carbon to use Vibration Mills for Activated Carbon to perform product, one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, grading equipment technology It is also imminent to replace. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

The Vibration Mills for Activated Carbon provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product.

In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize.
The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by a nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.
ALPA Phenolic Resin Vibration Mills for Activated Carbon Case Sharing: The company has a manufacturer of phenolic resin in its customers. The company found many powder equipment companies without suitable equipment. Finally, we found our ALPA, after the incoming experiment, our company's product Vibration Mills for Activated Carbon.
Technical parameters:
Finished product particle size: D50 less than 5μm

Production capacity: greater than 50kg / h

How should I operate when using
crusher starting Before, use the hand to scroll the rotor, check the jug, hammer and rotorIs there a flexible life, there is no bump appearance in the shell, and the rotation direction of the rotor is not the direction of the corridor, the power machine and the pulverizer are not outstanding.Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low
affect the work efficiency of the pulverizer.After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job.At any time, you should pay attention to the job status of the crusher, and the feeding should be uniform to prevent jams, do not have long-term overload operations.If there is found that vibration, noise, the bearing and the body temperature is too high, the external spray, etc., should be immediately stopped, exclude the failure of the sustainable job.

If you still have questions, you can contact AlPa Technology Co., Ltd., we warmly welcome users to come to consult, our company's equipment is manufactured, the size is complete, and there is a suitable for you!