Rotor Mills for EPOXY RESIN

The airflow pulverizer plays a vital role in the current industrial production. In various major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of airflow crushers, the various major industries are particularly medical, and the food industry puts forward new requirements in the pulverization process. It is desirable that the powder can be kept clean. In the manufacture of traditional airflow pulverizer, carbon steel, stainless steel is generally used as the lining material of the airflow pulverizer.

During the production process of crushing using Rotor Mills for EPOXY RESIN, the ultrasonic air flow generated by the device can constantly collide between materials, and this supersonic airflow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.

ALPA crystal sorbitol Rotor Mills for epoxy resin case Sharing: Taiwan's cosmetics requires a large amount of crystal sorbitol, and learned about our company to crush equipment through our company's ALPA agents. Customized service. After many incident experiments. Finally purchased a Rotor Mills for EPOXY ROTOR MILLS for EPOXY ROTOR.
Technical parameters:
finished particle size: 10-200 mesh
Production capacity: 10T

How to solve the problem of Rotor Mills for EPOXY RESIN noise? Let's take a look.
1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.
2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.