Vibration Grinder for nano coalcium carbonate

With the continuous development of pulverizer technology, Vibration Grinder for nano Calcium Carbonate has gradually penetrated into daily life.

The Vibration Grinder for nano Calcium Carbonate is based on the size of the powder particle size, the specific gravity is different, and the settlement speed is different from the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.

The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.


ALPA Steel slag Vibration Grinder for nano coalcium carbonate case sharing: This customer is a steel slag application Technology Co., Ltd., mainly engaged in the reuse of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA vertical air classifier.

Case parameters:

Product particle size: D97: 5-75μm
Hour Yield: 200-500kg

It is necessary to clean the Vibration Grinder for nano cagcium carbonate after long-term use. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and must never be damaged by machine components.

Shan dong alpa mainly engaged in the production and development and service of Vibration Grinder for nano Calcium Carbonate product technology, welcome to consult. The company takes good quality and service, affordable price, customer toThe attitude is a product and service of the airflow pulverizer for you.