2021-10-29 14:38:21
With the continuous increase in social needs, Turbo Grinder for Sepiolite continues to improve in the use of performance, finished product quality, service life, etc., very good to process raw materials into micrometers and even nanoscale fine powder, and are also chemical, Food, pesticides, cosmetics, dyes, coatings, electrons, etc. have been widely used.
The variety of Turbo Grinder for Sepiolite now is now very much, and the quality of the pulverization and the level are also very large. In general, assessing crushing properties in crushing is expressed in crushing efficiency, pulverizing precision. However, the definition of crushing efficiency and pulverization accuracy has many inconveniences in practical applications. Through the general definitions of the crushing efficiency of the assessment of unity and disadvantage of the assessment of crushing properties.
AlPa Aluminum Silicate Turbo Grinder for Sepiolite Experiment: A environmental protection technology company needs to grade aluminum ultrafine powder for aluminum silicate due to production demand, because uncertain demand can not be achieved, so the experiment is passed. Experiments We AlPA's air grading machine can grade the aluminum silicate ultrafine powder provided by the company. Finally, the product particle size obtained by the experiment: D90: 18.3 μm, yield: 460kg / h 加 加 加..
Welcomes all major Powder grading requirements manufacturers, to the factory, incoming experiments.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing material, it should be removedPowder, avoid clogging, affect the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
The equipment market is rapidly changing. At present, the airflow classifier has certain needs in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.
