Cell Mills for Old Battery

In the rapid development of rapid, there are many people have a certain understanding of Cell Mills for Old Battery, and crusher technology is in an absolute leading position in the industry.

The main advantage of Cell Mills for Old Battery is to change the linear and surface impact grinding of conventional grinding machines to space 3D impact grinding, and take advantage of high-speed airflow generated by jet in the material flow of the pulverizer. The pulverization region produces a gas-solid pulverization and grading circulating fluid effect on a similar fluid state, and improving the efficiency and energy integrated utilization of impact crushing.
The high-speed airflow generated by the jet impact can be fully utilized to the material flow of the pulling chamber than the other conventional methods. The average energy consumption is reduced by 30% to 40%. Since the impact-crushing area and the gas-solid flow zone are placed in the intermediate space of the pulverized chamber, the impact corrosion of high-speed airflow driven materials is improving, and the jet impact grinding process is improved. The most severe wear problem greatly reduces the possibility of material pollution, using high purity nitrogen, argon and other protective gas as a working medium, prevent oxidation, low-loop operating gas consumption, low cost. During the fully closed-loop operation, no dust is flying, and there is no contamination of the environment, and it is unharitten about the human body.

Product particle size: D80: 23.4
Yield: 175kg / h 加 加 量

1, the primary device such as the classifier, fan, etc. During the transportation process, there is an organic damage after storage, check the equipment inner cavity and the fan airway, rotate the grading impeller and the wind turbine spindle, and observe whether it is flexible.
2. Check the degree of fastening of the equipment pre-installed components, and must be added to the lubricating oil to be lubricated.
3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is completed, the first empty car is running 1-2 hours, and it is easy to securely check the accuracy and coordination of the equipment action at any time.

Shan dong alpa is committed to CELl Mills for Old Battery, has a mature process process, has a high energy technology research and development team, specializing in crusher research and development, survive by quality, welcome everyone to come to consult.