2021-10-29 10:02:12
Cell Grinder of Ceria can be used in the current industrial production process, and AlPA has been committed to research and development and application of grades for many years, and the grading we produced during many years of development. The machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.
The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. Cell Grinder of Ceria can be divided into static classifiers and dynamic classifiers based on whether there is moving parts. Cell Grinder of Ceria has become better and better. Many industries need to control the particle size of fine powder.
ALPA Activated Carbon Cell Grinder of Ceria Case Sharing: This customer is a research institute in Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic manufacturers, and finally choose to cooperate with our AlPa, purchased a Cell Grinder of Ceria.Cell Grinder of Ceria is a more accurate mechanical, in the daily use and maintenance process, some details still need operators' attention. In order to improve the pulverization efficiency of gas flow mill, it is necessary to check whether the feedstock meets the requirements before the production, and the foreign matter is strictly prohibited into the raw material.
In production, a certain number of materials must be maintained in the airflow grinding chamber. In the case where the flow rate of the pulverized gas is not changed, the material in the grinding cavity is large, the gradient current is large, and the material is small in the grinding cavity, the gradient current is small. In addition, the feeding speed must remain uniform and stable, don't be too fast or too slow.
If the feeding speed is too fast, the device will overload.
Regular maintenance equipment, often check whether the air supply pressure meets the pressure required, and the gas flow grinding motor, after 3,000 hours of operation, or long-term shutdown and long-term storage, should be cleaned in a gas flow grinder nozzle and grinding The inner wall of the cavity and attached to the material grading portion to prevent the effect of gas flow grinding on the grinding effect.
ALPA Technology Co., Ltd. developed super fine classifier, precision classification machine, etc. .
Previous: Vibration Mill of SOAP POWDER
