2021-10-28 17:04:13
Most of the product production and processing in the current stage uses Pin Crusher of Poly to perform the product of the product is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment is replaced. It is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
PIN CRUSHER OF POLY is suitable for combating machinery of materials such as synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed, such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus generated high-frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized. The pulverizer is almost no increase in the temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean and maintenance. General shells use water cooling and their own air volume, conveying crushing materials, improves temperature, and reduces thermal materials.
The wear of the blade is caused by the vibration of a large number of ultrasonic eddy currents and high frequency pressures generated by the blade. Compact, no dust, no dust.
ALPA Total Powder PIN CRUSHER OF POLY Experiment: Talp gradation machine is a often used in the production of talc, and our AlPA classifier has excellent performance. There are many talc production companies to come to our company. Perform talc grading experiments. Product particle size: 230kg / h
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. This speed regulationWith lubricating oil, N32 alkaline high-z7, high-grade anti-motor pressure oil, and reducer can not be replaced by other machines.After four or five months, new oil should be replaced.
Welcome everyone to continue to pay attention to our website to learn more!
Previous: Hammer Grinder for Metal Oxide
