Hammer Grinder for Metal Oxide

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

Hammer Grinder for Metal Oxide equipment requires the integration of equipment and technology research and development. Since the ultrafine powder grinding equipment must be adapted to specific material characteristics and product indicators, their specifications and models are varied, so there is no ultrafine powder grinding and grading equipment for any material.

Although China's crusher manufacturers are numerous, the overall R&D capability is weak, low product technology, and does not meet the application needs of high-end powder metallurgical equipment in the downstream field, and severely constrain China's crushing equipment development, with domestic manufacturers R&D The continuous investment and technology breakthroughs, domestic crushing equipment is expected to occupy greater share in the global market.

AlPA Cerium Hammer Grinder for Metal Oxide case share: The customer is a research institute in a well-known university in China, and the cerium oxide is ultrafinely pulverized during the study. Buy our AlPa Hammer Grinder for Metal Oxide.

Cerium oxide mechanical milling machine technical parameters:
finished particle size: 200-2000 mesh
Production capacity: 10-30kg

As a crusher, Shandong AlPa has been working to customers Provide greater value, the fineness, production capacity, and installation venues of each project are important information for custom selection, pre-sales service, 24-hour online customer service to answer questions, provide ideal communket production line solutions And accordingly, it provides the factory quotation to increase the escort for the cerium oxide crushing project.

Hammer Grinder for Metal Oxide Job Safety Application Basic Requirements

1 It is not allowed to use iron and sticks instead of hand feed.

2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane. 

3.After the equipment is installed, check the tightening of the fasteners, and tighten them if they are loose. At the same time, check whether the belt tightness is appropriate.

4. Whether the power machine and the pulverizing machine are lubricated.

5.Do not replace the pulley casually, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.

6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.

7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.

9. If you crush a hard raw material, the operator must wear glasses.

10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire. 

ALPA designated Hammer Grinder for Metal Oxide equipment has got a very good reputation in actual production applications, and it also won the praise of users. If you need to purchase Hammer Grinder for Metal Oxide, please feel free to contact us.