Cell Grinder of Needle-Like Plaster

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, constantly improve your own technical level, and constantly improve your own products, you can make Cell Grinder of Needle-Like Plaster industry a broader development space.

The main application of Cell Grinder of Needle-Like Plaster determines its extensive application range and finished product.
Typical materials are: super hard diamond, silicon carbide, metal powder, etc. High purity requirements: ceramic color, medicine, biochemistry, etc., low temperature requirements: medicine, PVC. By changing the normal air of the gas source into an inert gas such as nitrogen and carbon dioxide gas, it can be used as an inert gas protection device. Suitable for crushing of flammable and explosive and oxidative materials.

Our alpa classifier can meet the slide grading requirements of different yields of different granular sections, if you have a talc grade demand, it is not sure that the grading granularity can not be Implementation, please contact our customer service, we will contact you in the first time and verify that you can achieve your hierarchical needs.

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.

3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - compression level impeller motor - cyclone material, dust removal switch - fan - universal electricitySource empty press.

4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.

5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Shan dong alpa is a world-renowned particle and powder processing system provider. If you want to consult, you can get the answer you want by asking Shandong Alpa to get the answer you want, but it is not just a device. Price, there may be powder technology solutions in your industry, welcome to call us.