2022-01-13 16:55:18
Most of the product production and processing of products in the current stage, using Cell Mills of nano cagcium carbonate, the product, is a very common way of processing, with the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
When the Cell Mills of nano Calcium Carbonate screen material, the screen has good commonity under the air pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
ALPA Steel slag Cell Mills of nano Calcium Carbonate case sharing: This customer is a steel slag reuse technology company, which is mainly engaged in steel slag sorting project. Through the experiment, our AlPA classifier reached customer needs.
Product particle size: D80: 23.4
How to maintain ultra-fine Cell Mills of nano cagcium carbonate, introduce the following points to you:
1, smash The machine runs around each week, it is necessary to stop, check if the filter dust is blocked, cleaned the filter dusting film.
3, before the production, the air machine operation, check if there is any abnormal noise under the equipment, every two months, the stop inspection is loose.
4, before each shift is parked, the air machine is loaded, and all the materials of the cavity are all discharged.
The equipment market is a rapidly changing. At present, the airflow classifier has certain demand in the market, but the society is constantly evolving, no matter what industry needs to advance, it can leadLeading industry.
Previous: Cell Mill of ProGesterone
