Cell Mill of ProGesterone

Cell Mill of ProGesterone is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

A Cell Mill of Progesterone cost Very high, if you want to use Cell Mill of ProGesterone for a long time, please pay attention to the following:

During the production process, the temperature rise of the bearing should often be checked, when the temperature rise exceeds 50 ° C, Stop check, find out the cause, troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Cell Mill of ProGesterone's host and level distribution bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a 7 point of introduction to the day-to-day maintenance of Cell Mill of ProGesterone.



ALPA Cells Cell Mill of ProGesterone Case Sharing: This customer is a company that sells lithium carbonate, lithium hydroxide, potassium sulfate, and salt, which sells carbonated in it. During the lithium, it is found that the current customer needs is ultrafine powder of lithium carbonate, so it has upgraded the production line of lithium carbonate, purchased many of our Alpa's multiple Cell Mill of ProGesterone.
Technical parameters:
Finished granularity: D50: 5-8μm
Production capacity: 450kg

1. Install the filter dust removal equipment. Dust produced by high temperature pulverizer, foam dust removal, wetting agent dust removal, ultrasonic atomization technology,Composite filter bag dust removal, folding dust remover bag, wide spacing electric precipitator dust removal. The user can also consider the overall performance of dust removal, so combined dust removal is used.
2. Due to the mild leakage during the production process, the dust will appear, causing pollution to the work area. Therefore, the user needs to guarantee the sealing property of the pneumatic grinding machine.
3, increasing the humidity of the equipment operation area, strengthening ventilation, storing fire equipment, avoiding a large amount of dust inhaling the harm caused by the human body.
4. Production enterprises should be equipped with corresponding protective supplies as required for air compressor operators. The operators should also wear protective supplies in accordance with regulations.
5, do a good job in the maintenance and management of existing dust equipment, guarantee its normal operation and use dustproof. The maintenance management of high temperature crushers seems simple, and actual operation requires good attitude and habits.

Shandong Shan Dong Alpa produced various types of crusher, can have a variety of materials such as medicinal materials, ingredients and chemicals in powder, and the highest effect can reach. Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.