Ring Roller Mills of Gypsum

Ring Roller Mills of Gypsum is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

Ring Roller Mills of Gypsum technology is designed and manufactured in the designation and manufacturing of Rating.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

ALPA Chemical Pigment Ring Roller Mills of Gypsum Case Sharing: The company is a professional company that specializes in high-performance organic pigments. In its production process, pigment ultrafine pulverization equipment is required. The company's ultrafine crushing equipment is from our AlPa, which uses our company's RING ROLLER MILLS OF GYPSμm.
Technical parameters:
Finished particle size: 10-45μm
Production capacity: 300kg

After long-term use, it is necessary to clean RING ROLLER MILLS OF GYPSμm. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and must never be damaged by machine components.

If Ring Roller Mills of Gypsum is madeIf you use the needs and questions, please contact us Alpa,