Hammer Crusher of Rare Earth Alloy

Hammer Crusher of Rare Earth Alloy The mainly used pulverization mechanism determines the characteristics of its wide range of applications, high finished products, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, food, Health products, new materials and other industries.

Hammer Crusher of Rare Earth Alloy Main Performance Features:

1, it contains vertical hierarchical devices, product size D97: 8 150 microns adjustable, granular shape, and narrow particle size distribution . It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.


ALPA Battery Material Hammer Crusher of Rare Earth Alloy Case Sharing:
A energy company is a battery positive material production company with multiple production bases. The company's business scope includes new materials and main products research and development, battery materials and their accessories research, etc. The top of the list.

Product particle size: D50: 15μm

In the production process, the temperature rise of the bearing must be checked frequently, when the temperature rise exceeds 50 ° C, Stop checkups, find out that the cause is to troubleshoot. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

Today's Hammer Crusher's knowledge is introduced to you, think about it.For more information, please continue to pay attention to our website.