Cell Mill of Refractory CLAY ORE

Cell Mill of Refractory CLAY ORE is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage in the pulverization process, which is favored by the powder industry.

The crushing product is in addition to the particle size, and the particle size distribution is narrow, the particle name is smooth, the particle shape is high, and the high activity is high, the dispersibility is good.

ALPA Cobalt-Cell Cell Mill of Refractory Clay OOR Case Sharing: Beijing Lithium Electric Materials Company Pocked a Cell Mill of Refractory Clay Ore from our AlPa in 2020. Ultrafine pulverizer for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. In response to the company's unique needs, our ALPA engineers have been working hard to customize a Cell Mill of Refractory Clay ORE. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by different particle size products.

Technical parameters:
Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate small particles: 250 kg of cobalt acid lithium large particles: 500KG ternary: 500kg

Ultra-micro Cell Mill of Refractory CLAY ORE correct usage:

1, ultrafine pulverizer and The power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.

2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, pay attention to the operation of the pulverizer, the feeding should be uniform, to prevent blockingCar, don't have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.


Shan Dong Alpa is committed to Cell Mill of Refractory Clay Ore, has a mature process, strong technical strength, specializing in Cell Mill of Refractory Clay Ore, survive in quality, welcome everyoneCome to consult.