Impact Mill Machine for Tea Stem

Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder mills on materials, Impact Mill Machine for Tea STEM is the most effective in achieving ultrafine powder grinding of powder. One of the equipment. In China, after 20 years of development, the Impact Mill Machine for Tea Stem Industry has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.

1. Simple structure, Disassembly and packing is simple, convenient, just one person can complete the operation, disassembly and cleaning.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, Impact Mill Machine for Tea Stem causes the finished product to purity, no impurities, and non-polluting materials due to their pulverization principle.
4, the pulverization is good, the particle size distribution is uniform.

The above is the application of the Impact Mill Machine for Tea Stem in the industry.



ALPA baked wheat Impact Mill Machine for Tea STEM case sharing: This customer is a seasoning company, which requires a wheat that can be baked during its production. Perform ultrafine pulverized equipment. Investigate a number of domestic enterprises in China, and finally chose our AlPA as partners, purchased the Impact Mill Machine for Tea Stem from our side.
Technical parameters:
Finished granularity: D99.9: 180 mesh

Impact Mill Machine for Tea STEM silo does not small due reason, material length is accumulated In the silo plate knot, material moisture cake, the material appears in the silo, and the silo cone angle design does not have the rest of the material. Solving silo does not small materials suggests design phase to fully understand the properties of materials, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive properties. Using auxiliary measures, such as air disc, air hammer, air blowing, vibration discharge mechanism, artificial hitting, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It is made of cylindrical crushed room, grinding wheel, grinding rail, fan, materialCollection system, etc. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

Impact Mill Machine for Tea Stem's feeding system is one of the key components. It is often encountered in actual use. For example, the silo is not affected, the feed is not uniform, and even can't feed. Simple analysis of non-uniform feeding of feed is more sticky or fluidity, and the design of the feeding system is designed. Feeding uneven resolution suggests based on material properties systemic solution, such as silo structure, auxiliary sheet structure, feeding valve structure, auxiliary feeding measures, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three components, depending on the material properties, the design parameters of the feeding system are different.

The above is the use of the use of the Impact Mill Machine for Tea Stem products and the simple solution. Everyone must pay more attention when using it.

Shan Dong Alpa is committed to the Impact Mill Machine for Tea Stem, has a mature process process, the company has strong technical strength, specializing in crusher research and development, survive by quality, welcome everyone to come to consult.