Hammer Mills of Yellow Tea Leaves

With the rapid growth of China's economy, high-energy mining machinery industry, especially Hammer Mills of Yellow Tea Leaves will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.

A Hammer Mills of Yellow Tea Leaves costs, if you want to use Hammer Mills of Yellow Tea Leave for a long time, please pay attention to the following points:

1. In the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.Hammer Mills of Yellow TEA Leaves host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a 7 point introduction to the daily maintenance of Hammer Mills of Yellow Tea Leaves.



ALPA Hammer Mills of Yellow Tea Leaves Sharing: The company is a professional manufacturer of active biological extracts, which requires a superfine pulverizer that meets GMP requirements, and investigates a number of people. Powder equipment manufacturers, finally purchased our AlPa Hammer Mills of Yellow Tea Leaves.
Technical parameters:
Finished granularity: 100 full pass
Production capacity: 120kg

HAMMER Mills of Yellow Tea Leaves is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions to operate, minimize the damage rate, then use a jet ball millWhat is the previous precautions?Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris.If it should be handled in time to avoid damage to the tool.

6. If damage should be replaced immediately, certain components should be checked regularly.

Hammer Mills of Yellow Tea Leaves has a lot of normal use, and I want to know more about the superfine grader of the superfine grader, welcome to consult with us!