Turbo Mills of Polymer Powder

With the continuous advancement of pulverizer technology, Turbo Mills of Polymer Powder has been familiar with people. The most popular crushing equipment is now Turbo Mills of Polymer Powder. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

ALPA Chemical Pigments Turbo Mills of Polymer Powder Case Sharing: The company is a professional company that is engaged in research and development, production and sales of high-performance organic pigments. During its production process, pigment ultrafine pulverization equipment needs to be used. The company's ultrafine pulverized equipment is from our AlPa, which chooses our company's Turbo Mills of Polymer Powder.

Finished particle size: 10-45μm
Production capacity: 300kg


Super Turbo Mills of Polymer Powder uses air separation, heavy polishing, shear Forms to realize the ultra-smuggle equipment for dry materials, and are widely used in various industries. Let's take a brief introduction to its daily maintenance content.

2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, the total load of the machine is the bearing, so good lubrication and the life of the bearing have a large relationship, it can directly affect the machineLife and freight rate, the injection of lubricating oil is required to reach the standard, which is sealed.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.


If the later period is intended for ultra-fine classifiers, precision grading machines, jet grading machines, you can directly contact us, product quality is guaranteed, prices are fair, good service, welcome everyone to buy!