Rod Pin Grinder Of Still Polymer

Rod Pin Grinder of Still Polymer can be used for important or need to be grounded to granular product processing, the ALPA ultrafine pulverizer product is good, affordable, factory direct sales, also to promote after-sales maintenance service for customers, service attitude

Rod Pin Grinder Of Still Polymer is widely used in chemical, food, medicine, dry and other production industries, which play a role in these industries. In addition to the above industries, there are also industries such as minerals, paints, metallurgy, and even research units need Rod Pin Grinder of Still Polymer. Choosing the right Rod Pin Grinder of Still Polymer, not only guarantee the quality of materials, but also bring direct economic benefits to your business.

Alpa Xiashi Rod Pin Grinder of Still Polymer Experiment: A mining company needs to be sorted by the powder, through the experiment of our ALPA can do product particle size: D90: 16.8μm, Yield: 246kg / h 加 加 量
Welcome to the majority of major manufacturers with Xixia stone graded demand to the factory, and collective experiments.

Ultra-micro Rod Pin Grinder Of Still Polymer Inspection Work:
1, newly installed devices, inevitably residual iron, welding head, Solder and other foreign matter. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.