Vibration Grinder of Shell

Vibration Grinder of Shell balances are good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

The Vibration Grinder of Shell is different from other crushers. It is a collision between the particles, and the gas stream is pulverized, friction and shear and other components of the impact of the material. grinder. It has the following main features:

1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.

AlPa Steel slag Vibration Grinder of Shell Case Sharing: This customer is a steel slag re-use technology company, which is mainly engaged in steel slag sorting project. Through the experiment, our AlPA classifier reached customer needs.
Product particle size: D80: 23.4
Yield: 175kg / h 加 加

The Vibration Grinder of Shell is cleaned up in time when there is oil, and

vibration grinder of shell has been changed Become an essential equipment in the field of industrial production, it is not only advantageous as a common production equipment, and sometimes the Vibration Grinder of Shell is damaged. Let's take a look at how to check the repair equipment. .

Daily maintenance Vibration Grinder of Shell To check the power outlet, plug, the power cord is no oxygen offset, the break, if you don't need to plug the power test machine, when the motor is powered, do not rotate When the drain sheet can be rotated, it can be determined that one capacity fails in the two start capacitances of the machine. If you can make a discharge spark and there is a stunned sound, the capacitor can be used; if sparks and sound microWeak, indicating that the capacity of the capacitor has dropped, and it is necessary to change the new or add a small capacitor. The airflow pulverizer does not use this method if the capacitor has damaged the short circuit, and it must be replaced with the same size new product.

In addition to the product of Vibration Grinder of Shell, there is also a rod mill high-speed pulverizer. The quality of this crusher is very difficult to damage, while daily maintenance is more important, the following is this kind of gas stream. The maintenance focus of the pulverizer. Check if the lubrication of the bearing is good to check if all fasteners are tight. Check if the drive belt is installed correctly and the situation is good. Check if the protective device is good. If the protective device is found, it should be excluded in time. Check that there is no material or other debris in the damage chamber, if it is sometimes cleaned. Check if the hydraulic starting machine head or the starting roof rod is returned, the adjustment space is installed correctly and compact.

The above is the knowledge of the product daily maintenance and maintenance of the Vibration Grinder of Shell manufacturers.

Shandong Shan Dong Alpa produces various types of crushers, can have a variety of materials such as medicinal materials, ingredients, chemicals, etc., the highest effect can be more than 10,000. Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.