Cell Mills for Ferrosilicon

Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of Cell Mills for Ferrosilicon technology in China is stable and developed to the rate, strong control, high quality.

The working process of Cell Mills for Ferrosilicon is mainly after the material is accelerated through the nozzle, and the flow of compressed air enters the pulverization region, and the material is fluid, each particle has the same motion state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

AlPa Square Stone Cell Mills for Ferrosilicon Case Sharing: In 2020, our company successfully exported a Cell Mills for Ferrosilicon in the Philippines.
Technical parameters
Finished fineness: D50: 3μm
Production capacity: 2-20kg / h

1, use the grader to use according to the regulations, do not exceed the range of use because it will be very damaged.
2, if the superfine classifier is running, the operator does not stand in the range of rotation to avoid accidents.
3, the staff is in the work, in order to ensure their own safety, wear a well-dressed work apparel.
4, when the classifier is added, do not add hard, because the hard object will damage the machine.
5. If the classifier begins to work, the staff should not leave and prevent problems.
6. If the superfine grade machine is found, it is necessary to stop checking.
7. Do not open the cover or other actions before the classifier is not completely stopped, if you want to operate, you need to stop the machine completely.