Rod Pin Mill for Flame Retardant

Rod Pin Mill for Flame Retardant as a crushing main equipment, the role is increasing, in the industrial sector of metallurgy, mine, chemical, cement, a large number of raw materials and reuse waste every year It is necessary to use a classifier for processing. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size required for the next job. In the chemical, power sector, the hierarchy, the raw material is broken, grind, increase the surface area of \u200b\u200bthe material, has created favorable conditions to shorten the chemical reaction of the material.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.
ALPA Soybean Rod Pin Mill for Flame Retardant case Share: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's Rod Pin Mill for Flame Retardant.

In order to achieve better use, you must also pay attention to the daily maintenance of ROD PIN MILL FLAME RETARDANT, pay attention to the following:

2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Take the easy-to-damage parts and replace it,Ensure production quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.


The technology of ROD PIN MILL for Flame Retardant produced by AlPa makes the structure easier to make the classifier wear resistance.Friends needed to come to us!