Hammer Crusher of Poly

Hammer Crusher Of Poly is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Hammer Crusher Of Poly is compressed in the pulverization process, it is also suitable for ultrafine pulverization of low melting point and thermal material. The gas-resistant ratio in the Hammer Crusher Of Poly Process is an important technical parameter and important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.

When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
ALPA Pigments Hammer Crusher Of Poly Case Sharing: This customer needs to use a pigment ultrafine pulverizing apparatus during its production. Through the ultrafine pulverization of the pigment, improve the quality of the product, after many other types of equipment, finally chose our Alpa's Hammer Crusher's Poly. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.

finished particle size: D90: 13μm;
Production capacity: 130kg / h


In general, there are some sounds in operation. When Hammer Crusher Of Poly is pulverized, there will be broken sounds, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.

2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.

If you haveWant to know about other crushers, welcome to consult!