Rod Pin Mills for Textile Inkjet

Rod Pin Mills for Textile Inkjet is a mechanical equipment used in the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Airflow classification is from centrifugation, gravity , Inertial force, etc., depending on the centrifugal force, gravity and inertial force of different particle sizes in the gas (usually air), there is a classification of different particle sizes. Rod Pin Mills for Textile Inkjet can be divided into static classifiers and dynamic classifiers based on whether there is moving parts. Rod Pin Mills for Textile Inkjet has become better and better. Many industries need to control the particle size of fine powder.

Technical parameters:
Finished granularity: D50: 6.78 D90: 12.8μm
Production capacity: 30kg

During the production process, the temperature rise of the bearing must be checked, when warm When it is more than 50 ° C, it should be stopped, and the reason is to rule out the fault. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

Shan dong alpa mainly engaged in the production and development and service of Rod Pin Mills for Textile Inkjet product technology, welcome to consult. With good quality and service, affordable prices, customer-oriented attitudes provide airflow crushing products and services.