Cell Mills for Mineral Fillers

Cell Mills for Mineral Fillers is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

Cell Mills for Mineral Fillers work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

A material company is a professional research and development, production, sales and High-tech enterprises in technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45μm
Horses Yield: 3-10kg

1. Low powder temperature: no cooling system during continuous operation, the powder temperature is never Less than 50 degrees;

2. It can be applied to any fiber, high toughness, high hardness or a certain moisture content; for pollen or other spore plants, the material destroying the cell wall can break through 95%;

3. Ultrafine pulverizer can be chipped by adding water, alcohol or other liquid, or protective pulverization by introducing gas.

After understanding the characteristics of the ultrafine pulverizer, you should pay more attention to it when you purchase later, so you will choose a superfine pulverizer you satisfied.