Rotor Mill of ibuprofen

With the continuous advancement of crusher technology, Rotor Mill of Ibuprofen has been familiar with people. The most popular pulverized equipment is now the Rotor Mill of Ibuprofen. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Rotor Mill of Ibuprofen Features:

1. More other models significantly reduce investment and use cost, suitable for low value of coarse powder;

2, low energy consumption, Small noise; simple structure, less lossless parts, easy and easy to maintain;

3, low speed large diameter single-class wheel, large production capacity; inner wall wear protection;

4, automation Operation, intelligent instrument monitoring, low labor cost and labor intensity;

5, negative pressure running without dust leaked; achieve environmental protection and labor safety requirements;

6, running stable and reliable, product Good uniformity and consistency.

The above is to introduce the working principle and characteristics of Rotor Mill of Ibuprofen, and Rotor Mill of Ibuprofen's grading granular granular granularity is concentrated, and the customers' love are received. Welcome to inquire!

Technical parameters:
Finished product particle size: D90: 15-30μm

1, when crusher work, the operator should stand away from the hammer The tangential direction, is not allowed to wear gloves, and the hand does not exceed the safety line, and it is not allowed to use the iron and sticks instead of hand.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4, before the pulverizer starts, first turn the rotor with hand, check the jaw, hammerWhether the rotor operation is flexible, there is no collision in the shell, whether the rotation direction of the rotor is consistent with the direction of the arrow, whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

Shandong AlPa is a source manufacturer specializing in Rotor Mill of Ibuprofen, all the year round to provide equipment for domestic and foreign customers, welcome to inquire!