2021-12-21 09:08:59
With the rapid growth of China's economy, high-energy mining machinery industry, especially Hammer Grinder for Recycled Toner will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.
What factors affect the performance parameters used by Hammer Grinder for Recycled Toner?
The following is a detailed description:
1. Feed granular control
Most Hammer Grinder for Recycled Toner has a certain upper limit requirement for feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium
Currently, the working medium of Hammer Grinder for Recycled Toner is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed
Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit
Hammer Grinder for Recycled Toner In the pulverization process, as the particle size of the material decreases, the crystallization and strength of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or decreased slowly, that is, the crush limit of the material is reached.. At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.
ALPA lithium iron phosphate Hammer Grinder for Recycled Toner Sharing: This customer has expanded the production process, and found that our ALPA's phosphate's phosphate special crusher has been It is poor than the same type of equipment in other powder equipment companies at home and abroad, even in some aspects there are unique advantages. After experimenting, the company purchased Hammer Grinder for Recycled Toner.
Technical parameters:
Production capacity: 400kg
Hammer Grinder for Recycled Toner is necessary to clean the air pulverizer after long-term use. After cleaning the pulverizer, all machines must be removed. Detaching skill is also very good. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is removed, four screws on the base can be removed, and then remove the hopper. When the screen is removed, the airflow pulverizer door can be opened directly and the screen can be removed at the end. After the mobile gear is removed, the fastening nut is released first, and then the live teeth are separated from the spindle. Then move the mobile gear and put it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the gas flow crusher. Do not cause any damage to the components of the machine itself.
Shan Dong Alpa is committed to the development, production and sales of ultrafine powder and grading equipment, support according to demand, the equipment model is complete, the quality is reliable, the efficiency is high, the power consumption, the operation is simple, 24 Hours can consult!
