Rotor Mills for Lithium Carbonate

Since Rotor Mills for Lithium Carbonate is widely used in all walks of life, the research and development of classified machines at home and abroad pays great attention. In the current market, there is a great development space.

Rotor Mills for Lithium Carbonate is a set of grading systems, grading machines and cyclone separators, dust collectors, and airformations. It can be accurately classified from 200-5000 destination materials, and the material is moved by the casing of the stratigraphic airflow at the lower airflow at the bottom of the flushing airflow to separate the crude material. Separate, The fine particles that meet the particle size requirements are collected by the grading wheel blade gap. The crude particles are partially fine particles to hit the wall, and the roll wall drops to the secondary tight air, the strong Amoy of the second wind The washing is separated, and the fine particles rises to the secondary grade of the fractionation region, and the crude particles are dropped to the unloading port. This can be accurately graded out of the 1000 purpose powder required by this customer.

ALPA Aluminate Rotor Mills for Lithium Carbonate Case Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattened with similar companies in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Rotor Mills for Lithium Carbonate was purchased as a production equipment.

Technical parameters:

finished particle size: D97: 20μm
Production capacity: 100kg


In general, there are some sounds in operation. Rotor Mills for Lithium Carbonate will have broken sounds when crushing raw materials, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.

1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.

2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.


Shan Dong Alpa is committed to Rotor Mills for Lithium Carbonate, has a mature process, strong technical strength, specializing in crusher research and development, survive by quality, welcome everyone to come to consult.