Rotor grinder of pink quartz

In the classification operation in industrial production stage, Rotor grinder of use Pink quartz is mainly effective for particulate solids, we also present in the product ultrafine grinding process a grinding equipment commonly used.

The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

alpa Xia powder Rotor grinder of Pink quartz experiment: a mining company need to Xia powder powder were sorting through incoming experiments we can do alpa product size: D90: 16.8μm, yield : 246kg / h plus quantity
the majority have welcomed Xia powder classification requirements of the major manufacturers to visit the factory, send material experiments.

Let's talk about how to use the correct method of Pink quartz Rotor grinder of the

a ready check the host, accessory machines, pipes and valves before starting, is intact, if it works.
Second, open

1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair

1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.

4. After some time the filter bag, should be clearedWash or replace.
V. Note

1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
Shandong AlPa is a 20-year experience manufacturing company with ROTOR GRINDER OF PINK Quartz equipment, has a number of patents, welcome to inquire!