Pin Mill for Lithium Hydroxide

With the continuous increase in social needs, Pin Mill for Lithium Hydroxide is constantly improving in terms of performance, finished product quality, service life, etc., very well, is well processed into microtes and even nanoscale fine powder, and it is already chemical industry. , Food, pesticides, cosmetics, dyes, coatings, electrons, etc. have been widely used.

PIN MILL for Lithium Hydroxide is a set of grading systems, a grading machine and a cyclone separator, a dust collector, and a guide. It can be accurately classified from 200-5000 destination materials, and the material is moved by the casing of the stratigraphic airflow at the lower airflow at the bottom of the flushing airflow to separate the crude material. Separate, The fine particles that meet the particle size requirements are collected by the grading wheel blade gap. The crude particles are partially fine particles to hit the wall, and the roll wall drops to the secondary tight air, the strong Amoy of the second wind The washing is separated, and the fine particles rises to the secondary grade of the fractionation region, and the crude particles are dropped to the unloading port. This can be accurately graded out of the 1000 purpose powder required by this customer.

AlPA Silica Powder Pin Mill for Lithium Hydroxide Case Sharing:

A new energy company is a high-tech enterprise focusing on high performance lithium battery materials. The main business sector of the company involves the development and production of battery materials. Development and technology transfer with sales and battery technology.
The company is based on the development of lithium battery materials and technology. The company adheres to the innovation of science and technology, leading the future concept, and grows forward to new energy technology companies with core competitiveness.
Case parameters:
Product particle size: go to 3μm fine powder
Hour yield: 150kg

Now let's talk about the troubleshooting of Pin Mill for Lithium Hydroxide.

PIN MILL for Lithium Hydroxide Troubleshooting:
1, feed back irrigation: Improper tunnel adjustment, pipeline clogging, screen jamming, dust bag gas permeability or severe wear, hammer wear is serious, etc. It will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, strong vibration of airflow pulverizer: Installing the hammer head is wrong, the corresponding weight deviation of the two groups of heavy hammers is too large, and the bearing damage is damaged.Bad or spindle bending, the foot is connected to the screws.According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

For more consultation, please continue to pay attention to us, or inquire.