2021-12-14 08:56:14
Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of Turbo Mill for Aluminum Hydroxide technology is stable, especially the overall development trend of Turbo Mill for Aluminum Hydroxide technology, strong control, high quality.
When the Turbo Mill for Aluminium Hydroxide screen material, the screen has good uniformity under the pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
ALPA Soybean Turbo Mill for Aluminum Hydroxide case share: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's Turbo Mill for Aluminium Hydroxide.
1 Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors. 3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Take a lineAll re-lock again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment.After all of the above tests are normal, prepare the material production.
Welcome everyone chooses Shan Dong Alpa, the company specializes in the production and development and service of Turbo Mill for Aluminum Hydroxide product technology, the company provides customers with safe and reliable products and services to solve the vastThe worries of customers.
Previous: Pin Crusher for EPOXY RESIN
Next: Rod Pin Grinder of SLAQ
