Impact Mill Machine for Activated Carbon

Impact Mill Machine for Activated Carbon as a crushing main device, the role is increasing, in the industrial sector of metallurgy, mine, chemical, cement, has a large number of raw materials and reuse waste every year. It is necessary to use a classifier for processing. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size required for the next job. In the chemical, power sector, the hierarchy, the raw material is broken, grind, increase the surface area of \u200b\u200bthe material, has created favorable conditions to shorten the chemical reaction of the material.

Impact Mill Machine for Activated Carbon provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product.

In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize.
The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by a nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.

AlPa Pea Protein Impact Mill Machine for Activated Carbon Case Sharing: This customer is a food company in Russia. After looking for many powder equipment companies, they did not find the right equipment. It has been affected the company's production and operation, and finally I saw the ultra-fine pulverization of the pea protein before our website, and finally, through the incoming experiment, I finally determined the purchase of our company's Impact Mill Machine for Activated Carbon.
Technical parameters:

finished particle size: 400 mesh

Production capacity: 1.5T

How do Impact Mill Machine for Activated Carbon?
Before the device is turned on, the connection site, sealing and line, etc., and everything is not a problem before running the powder classifier.
The boot should be operated in the boot order.3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.

The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load.The particle fineness can be adjusted to adapt to the grading requirements.

Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power.The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

Shandong AlPa is a source manufacturer specializing in Impact Mill Machine for Activated Carbon, all the year round to provide equipment for domestic and foreign customers, welcome to inquire!