Rotor Mills for Solid Electrolyte

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, continuously improve your technical level, and constantly improve your own products, in order to make the airflow classifier industry have a broader development space.

Rotor Mills for Solid Electrolyte is simple, but the function is very powerful, using Rotor Mills for Solid Electrolyte usually gets a very good effect. Its design is simple, easy to operate, easy to clean.

ALPA Seaweed Feed Rotor Mills for Solid Electrolyte Case Sharing: The company is a seafarer enterprise in Yantai. It is found to be smashing the seaweed during breeding. It can be used as a sea cucumber feed, saving feed purchases. cost. By comparing a long-term use of a Rotor Mills for Solid Electrolyte, the cost of purchasing the feed can be saved in a few years. The company purchased our AlPa's Rotor Mills for Solid Electrolyte.
Technical parameters:
Finished granularity: D90: 400 mesh
Production capacity: 400kg / h

Now let's talk about the troubleshooting of Rotor Mills for Solid Electrolyte.

Rotor Mills for Solid Electrolyte Troubleshooting:
1 It will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound in the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is,To sound, the machine should immediately stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

For more consultation, please continue to pay attention to us, or inquire.