2021-12-07 10:16:43
Impact Mill for Spotted CLAY is good, only need to be produced in a smooth ground placement, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
Impact Mill for Spotted Clay is very widely used in industrial production, usually used to smash the added value, and after ultrafine crushing, it generally said that the application of materials is wider, and the value is more High, being loved by the industry.ALPA Carbonate Impact Mill for Spotted CLAY Case Sharing:
A lithium industry company is a new energy high-tech enterprise with a positive electrode material for preparation of lithium batteries - battery grade carbonate. The main product of sodium sulfate, battery-grade carbonate, and other products of industrial grade carbonate. The company has passed the certification of the Quality Management System, \"Environmental Management System\", ISO50001 \"Energy Management System\".
Case parameters:
Product particle size: D50: 5.5μm
Hour Yield: 900kg
1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.
Welcome everyone to continue to pay attention to our website to learn more!
